Christmas

Rotating Slat Christmas Tree

A tabletop tree made of 20 rotating slats: a flat fir, a spiral or a wave, different every day.

€5.99

Final price, no VAT charged under § 19 UStG. Digital download, no shipping.

You may gift and sell the pieces you print. License terms

About this model

Each slat turns on its own and clicks gently into place. So you can reshape the tree again and again, as a classic fir, a spiral or a fan. The round foot and the top look as if they were turned on a lathe.

About 27 cm tall and 17 cm wide
Everything just plugs together, no glue or tools needed
Lovely in wood filament or a green gradient
Please carry it by the foot, the slats only rest loosely

You will find all printing details under “Print info & files”.

Print info & files

Included files

Weihnachtsbaum_Drehleisten_v0.1.zipZIP · 856.8 KB
01_Fuss.stlSTL · 183.3 KB
02_Stammhuelse.stlSTL · 100.5 KB
03_Leiste_01.stlSTL · 41.7 KB
04_Leiste_02.stlSTL · 42.1 KB
05_Leiste_03.stlSTL · 41.7 KB

Show all 29 files

06_Leiste_04.stlSTL · 41.3 KB
07_Leiste_05.stlSTL · 41.3 KB
08_Leiste_06.stlSTL · 40.9 KB
09_Leiste_07.stlSTL · 40.9 KB
10_Leiste_08.stlSTL · 41.3 KB
11_Leiste_09.stlSTL · 42.1 KB
12_Leiste_10.stlSTL · 41.7 KB
13_Leiste_11.stlSTL · 41.7 KB
14_Leiste_12.stlSTL · 41.9 KB
15_Leiste_13.stlSTL · 42.7 KB
16_Leiste_14.stlSTL · 42.7 KB
17_Leiste_15.stlSTL · 42.7 KB
18_Leiste_16.stlSTL · 42.7 KB
19_Leiste_17.stlSTL · 42.7 KB
20_Leiste_18.stlSTL · 43.1 KB
21_Leiste_19.stlSTL · 42.7 KB
22_Leiste_20.stlSTL · 43.1 KB
30_Spitze.stlSTL · 187.4 KB
40_Achse_1.stlSTL · 9.4 KB
41_Achse_2.stlSTL · 8.1 KB
Platte_1_Fuss_Huelse_Spitze_Achse.3mf3MF · 171.7 KB
Platte_2_Leisten_01_bis_10.3mf3MF · 141 KB
Platte_3_Leisten_11_bis_20.3mf3MF · 144.6 KB

Version 1.0 · 13 Oct 2026

Print info

Recommended material: PLA oder PLA+
Layer height: 0,2 mm
Supports needed: No
Print time: ca. 5 Std. 15 Min. (Slicer Schätzung, alle Teile)
Bed size: 180 x 180 mm (Teile einzeln, nicht im Slicer getestet), 256 x 256 mm für die fertigen Platten
Print orientation: Alle Teile wie geliefert, Leisten flach, Achse liegend

Print all parts as supplied, no supports. PLA or PLA+, 0.4 mm nozzle, 0.2 mm layer height, 15 % infill. Use a brim for the two axle segments. All parts about 5 h 15 min and 216 g on 3 plates. Not test printed yet, fit and click stops have not been confirmed on a real print.